Kobelco SK-6E Excavator Error Codes
trouble code | fault description |
A-1 | ROM data |
A-2 | A Maladjustment |
B-1 | Big arm up. |
B-2 | Big arm down. |
B-3 | arm extension |
B-4 | Small Arm Recovery |
B-5 | Bucket Recovery |
B-6 | outward-sloping dipper |
B-7 | right-hand side |
B-9 | right walking |
B-10 | left-walking |
C-1 | P1 pump |
C-2 | P2 pump |
D-1 | P1 neutral cutoff |
D-2 | P2 neutral cutoff |
D-3 | walk straight ahead |
D-4 | Variable regeneration of small arms |
D-6 | Variable regeneration of small arms |
E-1 | P1 pump |
E-2 | P2 pump |
F-1 | pressurize |
F-2 | Rotary Brake |
F-3 | walking at two speeds (idiom); traveling at two speeds |
G-1 | step current |
G-2 | starting index (of a machine) |
G-3 | RPM Sensor |
G-4 | Water Temperature Sensor |
G-5 | oil pressure |
H-1 | Signal reception anomaly |
H-2 | battery relay |
Kobelco SK200-2/-3 Excavator Fault Codes
trouble code | fault description |
A-1 | Poor ROM data (no electromechanical A adjustment) |
A-2 | Electromechanical A Poor adjustment |
A-3 | CPU abnormality |
B-1 | Abnormal Arm Rise Pressure Sensor |
B-2 | Abnormal arm lowering pressure sensor |
B-3 | Abnormal small arm retraction pressure sensor |
B-4 | Abnormal small arm extensor pressure sensor |
B-5 | Abnormal bucket retraction pressure sensor |
B-6 | Abnormal bucket outreach pressure sensor |
B-7 | Abnormal rotary pressure sensor |
B-9 | Abnormal right travel pressure sensor |
B-10 | Abnormal left travel pressure sensor |
C-1 | P1 Abnormal oil pump pressure sensor |
C-2 | P2 Abnormal oil pump pressure sensor |
D-1 | P1 Neutral cut-off proportional valve abnormality |
D-2 | P2 Neutral cut-off proportional valve abnormality |
D-3 | Abnormal linear travel proportional valve |
D-4 | Abnormal Arm Merge Proportional Valve (-2 models only) |
D-5 | Abnormal slow-speed rotary proportional valve (-2 models only) |
D-6 | Small arm variable regeneration proportional valve abnormality (-3 models only) |
E-1 | P1 Abnormal oil pump proportional valve |
E-2 | P2 Abnormal oil pump proportional valve |
F-1 | Booster solenoid valve abnormal |
F-2 | Abnormal rotary brake solenoid valve |
F-3 | Travel speed changeover solenoid valve abnormal |
F-4 | FC mode (micro operation) solenoid valve abnormality (-2 models only) |
F-5 | Linear travel solenoid valve abnormality (-2 models only) |
G-1 | Abnormal stepper motor current |
G-2 | Stepper motor indexing without starting point |
G-5 | Engine stalled (E/G reversal displayed) |
Kobelco SK200-6 Excavator Fault Codes
trouble code | fault description |
1-1 | Abnormal communication between instrument and electromechanical controller |
1-2 | Battery relay abnormal |
A-1 | No E&E A adjustment |
A-2 | Electromechanical A Poor adjustment |
B-1 | Abnormal pressure sensor on the upper arm |
B-2 | Abnormal arm lowering pressure sensor |
B-3 | Abnormal small arm retraction pressure sensor |
B-4 | Abnormal small arm extensor pressure sensor |
B-5 | Abnormal bucket retraction pressure sensor |
B-6 | Abnormal bucket outreach pressure sensor |
B-7 | Abnormal right rotary pressure sensor |
B-8 | Abnormal left rotary pressure sensor |
B-9 | Abnormal right travel pressure sensor |
B-10 | Abnormal left travel pressure sensor |
B-11 | P1 Negative pressure sensor abnormality |
B-12 | P2 Negative pressure sensor abnormality |
B-15 | Abnormal back pressure sensor |
C-1 | P1 Abnormal oil pump pressure sensor |
C-2 | P2 Abnormal oil pump pressure sensor |
D-1 | P1 Neutral cut-off proportional valve abnormality |
D-2 | P2 Neutral cut-off proportional valve abnormality |
D-3 | Abnormal linear travel proportional valve |
D-6 | Small arm variable regeneration proportional valve abnormality |
E-1 | P1 Abnormal oil pump proportional valve |
E-2 | P2 Abnormal oil pump proportional valve |
F-1 | Booster solenoid valve abnormal |
F-2 | Abnormal rotary brake solenoid valve |
F-3 | Travel speed changeover solenoid valve abnormal |
G-1 | Abnormal stepper motor current |
G-2 | Stepper motor indexing without starting point |
G-3 | Abnormal engine speed sensor |
H-1 | Abnormal throttle knob |
Kobelco SK330-6E Excavator Error Codes
trouble code | fault description |
P0540 | Failure of the preheating unit (disconnection/CND short circuit) |
P0540 | Preheater failure (+B short circuit) |
P0617 | Faulty starter switch circuit |
P0686 | Main Relay Circuit Failure |
P0629 | Fuel supply solenoid valve circuit failure (+B shorted), engine won't start/engine stops |
P0628 | Fuel pump solenoid valve circuit failure (full output mode), output drops |
P2635 | Fuel pump abnormal pressure history |
P2635 | Fuel pump solenoid stuck |
P0088 | Abnormal common rail pressure, decreased output |
P1211 | Injector solenoid drive system common rail 1 failure (GND shorted), output drop/cylinder break operation (1 time, 4 times) |
P1214 | Injector solenoid drive system common rail 2 failure (GND shorted), output drop/cylinder break operation (2 times, 3 times) |
P1212 | Injector solenoid drive system common rail 1 fault (+B shorted/broken), output drop/cylinder break operation (1 time, 4 times) |
P1215 | Injector solenoid drive system common rail 2 fault (+B shorted/broken), output drop/cylinder break operation (2 times, 3 times) |
P1601 | Injector multipoint correction abnormality, output drop |
P0201 | Injector 1 Solenoid Circuit Disconnected, Output Dropped / Disconnected Cylinder Operation (1 time) |
P0202 | Injector 2 Solenoid Circuit Disconnect, Output Dropout/Cylinder Shutdown Operation (2x) |
P0203 | Injector 3 Solenoid Circuit Disconnect, Output Drop/Out Cylinder Run (3 times) |
P0204 | Injector 4 Solenoid Circuit Disconnect, Output Drop/Out Cylinder Run (4 times) |
P0263 | Cylinder Recharging Failure 1 |
P0266 | Cylinder Charging Failure 2 |
P0269 | Cylinder Recharging Failure 3 |
P0272 | Cylinder Recharging Failure 4 |
P0489 | EGR Valve Linear Solenoid 1 Failure (break/GND short), output drops |
P0490 | EGR Valve Linear Solenoid 1 Failure (VB shorted), output down |
P0404 | EGR valve stuck 1, output down |
P0405 | EGR Valve Safety Sensor 1 Failure (LO) |
P0406 | Valve safety sensor 1 failure (HI) |
P0234 | Turbo overboost and output drop |
P0217 | Engine overheating, reduced output |
P0219 | Engine Flyer Communication: U1001, CAN Communication Interruption (Vehicle) |
P0611 | ECU Poor charging circuit (LO), output drop |
P0200 | ECU Poor charging circuit (HI) |
P0605 | ROM abnormality |
P0606 | CPU failure, engine does not start engine stops |
P0607 | CPU monitoring IC abnormality, output drop |
Kobelco -8, Super 8 Excavator Fault Codes
trouble code | Fault content |
A015 | Engine adjustment not performed (A adjustment), or adjustment failed |
A025 | Pump proportional valve adjustment (B adjustment) not performed, or adjustment failed |
A035 | Unloading valve adjustment (C adjustment) not made, or adjustment failed |
A215 | ROM adjustment data write data abnormality |
A225 | ROM adjustment data writing abnormality |
A235 | ROM timer data write data exception |
A245 | ROM timing data writing exception |
A255 | Proportional valve adjustment data writing abnormality |
B012 | Arm Rise Pressure Sensor Abnormal Output |
B014 | Arm Rise Pressure Sensor Shorted power supply |
B022 | Arm lowering pressure sensor Abnormal output |
B024 | Arm Lowering Pressure Sensor Shorted power supply |
B032 | Small arm extension pressure sensor Abnormal output |
B034 | Small Arm Extension Pressure Sensor Shorted power supply |
B042 | Small arm recovery pressure sensor Abnormal output |
B044 | Small Arm Recovery Pressure Sensor Shorted power supply |
B052 | Bucket digging pressure sensor Abnormal output |
B054 | Bucket digging pressure sensor Power short circuit |
B062 | Bucket dump pressure sensor Abnormal output |
B063 | Bucket Tipping Pressure Sensor Disconnected Abnormal |
B064 | Bucket tipping pressure sensor Short circuit in power supply |
B072 | Rotary pressure sensor Abnormal output |
B073 | Rotary Pressure Sensor Disconnection Abnormal |
B074 | Rotary pressure sensor Power supply short circuit |
B092 | Right travel pressure sensor Abnormal output |
B094 | Right travel pressure sensor Power supply short circuit |
B102 | Left travel pressure sensor Abnormal output |
B104 | Left Travel Pressure Sensor Shorted power supply |
B113 | Option Selector Position Detection Pressure Sensor Disconnection Abnormal |
B114 | Option Selector Position Detection Pressure Sensor Power Supply Short Circuit |
B162 | P1 side option pressure sensor Abnormal output |
B163 | P1 side option pressure sensor Disconnection abnormality |
B164 | P1 side option pressure sensor Power supply short circuit |
B172 | P2 side option pressure sensor Abnormal output |
B173 | P2 side option pressure sensor Disconnection abnormality |
B174 | P2 side option pressure sensor Power supply short circuit |
C012 | P1 pump pressure sensor Abnormal output |
P1 Pump Pressure Sensor Disconnected Abnormal | |
C014 | P1 pump pressure sensor Shorted power supply |
C022 | P2 pump pressure sensor Abnormal output |
C024 | P2 pump pressure sensor Shorted power supply |
C033 | Big Arm Head Pressure Sensor Disconnection Abnormal |
C034 | Large Arm Head Pressure Sensor Shorted power supply |
C043 | Big arm bar pressure sensor Disconnection abnormality |
C044 | Large arm bar pressure sensor Power supply short circuit |
D012 | P1 Unloading proportional valve Output transistor ON Error |
D022 | P2 Unloading proportional valve Output transistor ON Failure |
D032 | Traveling direct proportional valve Output transistor ON Error |
D062 | Small Arm Recovery 2 Speed Proportional Valve Output Transistor ON Failure |
Small arm recovery 2-speed proportional valve Disconnection abnormality | |
E012 | P1 Pump Proportional Valve Output Transistor ON Failure |
E022 | P2 Pump Proportional Valve Output Transistor ON Failure |
P2 pump proportional valve Disconnection abnormality | |
F011 | Work unit pressurizing solenoid valve Output transistor OFF Failure, short circuit to ground |
Work unit pressurizing solenoid valve Output transistor ON Failure, disconnection | |
F021 | Rotary stop solenoid valve Output transistor OFF Failure, ground short circuit |
Rotary stop solenoid valve Output transistor ON Failure, disconnection | |
F031 | Travel 1-2 speed solenoid valve Output transistor OFF Failure, ground short circuit |
Travel 1-2 speed solenoid valve Output transistor ON Failure, disconnection | |
F041 | Option selector solenoid valve Output transistor OFF Failure, short circuit to ground |
F043 | Option selector Output transistor ON Failure, disconnection |
G032 | Speed sensor with direct input from mechatronic controller Overruns |
G033 | Abnormal disconnection of the speed sensor input directly from the mechatronic controller. |
G042 | Overrun of data received from the speed sensor and engine controller directly input from the mechatronic controller |
G043 | The data directly input from the electromechanical controller to the speed sensor and received from the engine controller are disconnected abnormality |
H013 | Throttle Potentiometer Disconnect Abnormal |
H014 | Throttle potentiometer Shorted power supply |
H023 | Arm angle potentiometer Disconnect abnormality |
H024 | Large Arm Angle Potentiometer Shorted power supply |
H033 | Small Arm Angle Potentiometer Disconnection Abnormal |
H034 | Small Arm Angle Potentiometer Shorted power supply |
H091 | Fuel sensor Abnormal short circuit to ground |
H093 | Fuel Sensor Disconnect Abnormal |
I111 | CAN1 communication reception abnormality (passive failure) |
I113 | CAN1 communication reception abnormality (contact interruption) |
I313 | Abnormal reception of instrument group communication (contact interruption malfunction) |
K014 | Battery relay contact sintered |
R014 | Abnormal wiper motor arc prevention relay |
R024 | Abnormal wiper motor positive relay |
R034 | Abnormal wiper motor reversing relay |
R044 | Water sprayer motor unit electrical abnormality |
R134 | Rotary flash relay abnormal |
R144 | Rotary flash relay abnormal |
R154 | Abnormal travel alarm relay |
R164 | Automatic idle stop relay 2 abnormal |
R174 | Engine forced stop relay abnormal |
R184 | Control lever lock relay abnormal |
R214 | Abnormal safety relay |
Kobelco -8, Super 8 engine trouble codes
trouble code | Inferring the cause of failure |
P0335 | Failure of the main rotary sensor system |
P0606 | CPU failure (hard disk check out) |
P0629 | Supply Solenoid System Failure |
P0200 | Poor ECU charging circuit (HI) |
P0611 | Poor ECU charging circuit (LOW) |
P2120 | Two Throttle Sensor System Malfunctions |
P0217 | overheat (e.g. an economy) |
P0540 | Preheater failure (open/GND short circuit) |
P0540 | Preheater failure (+B short circuit) |
P0234 | Turbocharger overload device |
P0088 | Abnormal common rail diesel injection system pressure, control system |
P0088 | Common Rail Diesel Injection Unit System Pressure Abnormal, Pump Overpressure Delivery |
P0108 | Boost sensor failure (HI) |
P0117 | Water Temperature Sensor Failure (LOW) |
P0118 | Water temperature sensor failure (HI) |
P0191 | Common Rail Diesel Injection Pressure Sensor Failure |
P0192 | Common Rail Diesel Injection Pressure Sensor Failure (LOW) |
P0193 | Common Rail Diesel Injection Pressure Sensor Failure (HI) |
P0201 | Fuel Injection Unit 1 Solenoid System Disconnected |
P0202 | Fuel Injection Unit 2 Solenoid System Disconnected |
P0203 | Fuel Injection Unit 3 Solenoid System Disconnected |
P0204 | Fuel injection unit 4 Solenoid system disconnected |
P0237 | Boost Sensor Failure (LOW) |
P0404 | EGR Valve Fastening 1 |
P0405 | EGR Valve Lift Sensor 1 Failure (LOW) |
P0406 | EGR Valve Lift Sensor 1 Failure (HI) |
P0489 | EGR Valve Linear Solenoid 1 Failure (Disconnected, GND Shorted) |
P0490 | EGR Valve Linear Solenoid 1 Failure (VB Shorted) |
P0605 | Flash ROM abnormality |
P0607 | CPU monitoring IC abnormality |
P0628 | Supply Pump Solenoid System Failure (Full Spit Mode) |
P1211 | Fuel injection unit solenoid valve drive system GND short-circuit-common-rail 1 fault |
P1212 | Fuel injection unit solenoid valve drive system +B short-circuit-common-rail 1 fault |
P1212 | Fuel injection unit solenoid valve drive system On - Common Rail 1 Fault |
P1214 | Fuel injection unit solenoid valve drive system GND short-circuit-common-rail 2 fault |
P1215 | Fuel injection unit solenoid valve drive system +B short-circuit-common-rail 2 fault |
P1215 | Fuel injection unit solenoid valve drive system On - Common Rail 2 Fault |
P1601 | Abnormal fuel injection unit multi-point assist |
P2228 | Atmospheric Pressure Sensor Failure (LOW) |
P2229 | Atmospheric pressure sensor malfunction (HI) |
P2635 | Fuel supply pump solenoid valve fastening |
P2635 | Malfunctioning oil supply pump |
P0182 | Fuel temperature sensor failure (LOW) |
P0183 | Fuel temperature sensor failure (HI) |
P0340 | Failure of the secondary rotary sensor system |
P0686 | Failure of the main relay system |
P2122 | Throttle sensor 1 fault (LOW) |
P2123 | Throttle sensor 1 fault (HI) |
P2127 | Throttle Sensor 2 Failure (LOW) |
P2128 | Throttle Sensor 2 Failure (HI) |
P1133 | Emergency throttle sensor failure (HI) |
P0219 | engine overrun |
P0263 | Cylinder-to-cylinder correction error # 1 |
P0266 | Cylinder-to-cylinder correction error # 2 |
P0269 | Cylinder-to-cylinder correction error # 3 |
P0272 | Intercylinder Auxiliary Error # 4 |
P0617 | Starter switching system failure |
P2635 | Abnormal pressure history of supply pump |
U1001 | CAN communication stop (mechanical) |
Found your code? Work through these three checks
A fault code tells you which circuit the machine has flagged. It does not tell you which part has failed. Run these checks before ordering anything.
Record the exact code, model and serial number. Code meanings differ between the -6E, -8 and -10 series, and the same code can point to a different circuit on another machine. Take a photo of the display before anything is disconnected.
Inspect that circuit first. Check connector seating, corrosion, chafed wiring and the fuse or supply feeding the component. A loose connector and a failed sensor produce the same code, and the wiring check costs nothing.
Clear the code and reproduce the fault. Run the machine under the same load or temperature that triggered it. If the code returns immediately, follow the guide for that code below. If it only returns under load, note the condition before replacing parts.
Step-by-step fix guides by code and by series
Once you know which circuit is involved, open the guide for your code or machine series rather than guessing at a part.
Need help matching a code to a part?
Send us the model, serial number, the exact code on the display and what you have already tested. Our technical team will help identify the part involved before you order.
Send your fault code for a part match

